Asus T2-R User Manual
Page 32
Advertising
32
Chapter 2: Basic installation
6.
Re-install the metal tray and the
HDD by sliding it to the tray
hooks.
7.
Secure the HDD metal tray with
the flat head screw you earlier
removed.
8.
Connect one end of the 40-pin
IDE cable to the IDE connector
on the drive.
9.
Connect a 4-pin power plug
from the power supply unit to
the HDD power connector.
10. Connect the other end of the
IDE ribbon cable to the primary
IDE connector (blue connector
labeled PRI_IDE) on the
motherboard. See page 53 for
the location of the primary IDE
connector.
6
7
8
9
Advertising