Primary.ide.master/slave,.sata1~6, Type.[auto, Lba/large mode [auto – Asus V7-M4A3000E User Manual

Page 65: Block (multi-sector transfer) m [auto

Advertising
background image

ASUS V-series M4A3000E

4-11

4.3.3.

Primary.IDE.Master/Slave,.SATA1~6

While entering Setup, the BIOS automatically detects the presence of IDE/SATA

devices. There is a separate sub-menu for each IDE/SATA device. Select a device

item then press <Enter> to display the IDE/SATA device information.

The BIOS automatically detects the values opposite the dimmed items (Device,

Vendor, Size, LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and

SMART monitoring). These values are not user-configurable. These items show

Not Detected if no IDE/SATA device is installed in the system.

Type.[Auto]

Selects the type of IDE/SATA drive. Setting to Auto allows automatic selection

of the appropriate IDE/SATA device type. Select CDROM if you are specifically

configuring a CD-ROM drive. Select ARMD (ATAPI Removable Media Device)

if your device is either a ZIP, LS-120, or MO drive. Configuration options: [Not

Installed] [Auto] [CDROM] [ARMD]

LBA/Large Mode [Auto]

Enables or disables the LBA mode. Setting to Auto enables the LBA mode if the

device supports this mode, and if the device was not previously formatted with LBA

mode disabled. Configuration options: [Disabled] [Auto]

Block (Multi-sector Transfer) M [Auto]

Enables or disables data multi-sectors transfers. When set to Auto, the data

transfer from and to the device occurs multiple sectors at a time if the device

supports multi-sector transfer feature. When set to [Disabled], the data transfer

from and to the device occurs one sector at a time.

Configuration options: [Disabled] [Auto]

This item appears only when you select the Primary.IDE.Master/Slave and

SATA5/6 devices.

Select the type

of device connected

to the system

BIOS SETUP UTILITY

Main

Primary IDE Master

Device : Not Detected

Type

[Auto]

LBA/Large Mode

[Auto]

Block(Multi-Sector Transfer) M [Auto]

PIO Mode

[Auto]

DMA Mode

[Auto]

SMART Monitoring

[Auto]

32Bit Data Transfer

[Enabled]

Select Screen

Select Item

Enter Go to Sub-screen

F1 General Help

F10 Save and Exit

ESC Exit

v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.

Select the type of

device connected

to the system.

Advertising
This manual is related to the following products: