Asus P1-AH2 - Manual (Page 64)

5-6 Chapter 5: BIOS setup
Do not shut down or reset the system while updating the BIOS to prevent
system boot failure!
3. Press <Alt> + <F2> during POST, the following screen appears:
ASUSTek EZ Flash 2 BIOS ROM Utility B312
FLASH TYPE: Winbond W39V040C/FC (4MB)
BOARD: M2N8L
VER: 0105
DATE:05/04/2006
PATH: D:\
BOARD: Unknown
VER: Unknown
DATE: Unkonwn
Update BOM
A:
B:
C:
D:
E:
F:
G:
H:
TRASHE~1 <DIR>
P5B.ROM 1048576 2002-01-01 00:01:32
M2N8L.BIN 524288 2006-05-04 22:43:12
Note
[Enter] Select [S] Save [ESC] Exit
[Tab] Switch [Up/Down/Home/End] Move
Current BOM
3. Select the floppy disk from the PATH: text box, then select the BIOS file’s
name from the text box on the right side (see figure below). Then press Enter
on your keyboard.
ASUSTek EZ Flash 2 BIOS ROM Utility B312
FLASH TYPE: Winbond W39V040C/FC (4MB)
BOARD: M2N8L
VER: 0105
DATE:05/04/2006
PATH: D:\
BOARD: Unknown
VER: Unknown
DATE: Unkonwn
Update BOM
A:
B:
C:
D:
E:
F:
G:
H:
Note
[Enter] Select [S] Save [ESC] Exit
[Tab] Switch [Up/Down/Home/End] Move
Current BOM
TRASHE~1 <DIR>
P5B.ROM 1048576 2002-01-01 00:01:32
M2N8L.BIN 524288 2006-05-04 22:43:12
4. An “Are you sure to update BIOS?” message appears.Select “Yes” and
press Enter on your keyboard, the EZ Flash utility will perform BIOS update
process. The process may take a few minutes to complete.