Asus P1-AH2 - Manual (Page 87)

ASUS Pundit P1-AH2 5-29
5.5.4 Hardware Monitor
The items in this sub-menu displays the hardware monitor values automatically
detected by the BIOS. It also allows you to change CPU Q-Fan feature-related
parameters. Select an item then press <Enter> to display the configuration options.
Select Menu
Item Specific Help
Press [Enter] to enable or
disable.
Hardware Monitor
CPU Temperature 45C
M/B Temperature 35C
Vccp [1.34V]
5V [4.96V]
x 12V [11.71V]
3.3V [3.21V]
CPU Fan Speed 934 RPM
CPU Fan Speed warning [800 RPM]
Fan Control [Enabled]
Fan Low Temp [45C]
Temperature Range [26.67C]
Set CPUFAN RAMP RATE [7 secs]
Fan1 Full Run Temp [63]
CPU Fan Low Voltage [ 4.0V]
Phoenix-Award BIOS CMOS Setup Utility
Power
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select SubMenu F10: Save and Exit
3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output through
the onboard voltage regulators.
CPU Temperature, M/B Temperature
The onboard hardware monitor automatically detects and displays the motherboard
and CPU temperatures. These items are not user-configurable.
CPU Fan Speed
The onboard hardware monitor automatically detects and displays the CPU, fan
speeds in rotations per minute (RPM). These items are not user-configurable.
CPU Fan Speed warning [ 800 RPM]
Allows you to disable or set the CPU fan warning speed.
Configuration options: [Disabled] [800 RPM] [1200 RPM] [1600 RPM]