Asus Pundit-PE3 - Manual (Page 38)

2 - 2 2 2 - 2 2 2 - 2 2 2 - 2 2 2 - 2 2 C h a p t e r 2 : B a s i c i n s t a l l a t i o n C h a p t e r 2 : B a s i c i n s t a l l a t i o n C h a p t e r 2 : B a s i c i n s t a l l a t i o n C h a p t e r 2 : B a s i c i n s t a l l a t i o n C h a p t e r 2 : B a s i c i n s t a l l a t i o n
2.10 Installing the foot stands
You need to install the foot stands to place the system vertically on your
desktop.
To install the foot stands:
1. Lay the system on its side on a
flat, stable, and elevated surface,
then locate two screw holes on
the left side of the system.
2. Extend the left side of the system
at least 3 cm from the edge of
surface to facilitate installation.
3. Position the foot stand on the
chassis side until their screw holes
align.
4. Drive in a screw to secure the
footstand to the chassis.
5. Repeat steps 3 to 4 to install the
the second foot stand.
The photo on the right shows the
system in a vertical desktop
placement.