Asus V3-M2NC61S - Manual (Page 79)

Chapter 5: BIOS setup 5-18
Phoenix-Award BIOS CMOS Setup Utility
Main Advanced Power Boot Tools...Exit
Select Menu
Item Specific Help
Press enter to Set
CPU Configuration
Chipset
PCIPnP
Onboard Device Configuration
USB Configuration
5.4 Advanced menu
The Advanced menu items allow you to change the settings for the CPU
and other system devices.
Take caution when changing the settings of the Advanced menu items.
Incorrect field values can cause the system to malfunction.
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select SubMenu F10: Save and Exit
Head
Shows the number of the hard disk read/write heads. This item is not
configurable.
Landing Zone
Shows the number of landing zone per track. This item is not configurable.
Sector
Shows the number of sectors per track. This item is not configurable.
After entering the IDE hard disk drive information into BIOS, use a disk
utility, such as FDISK, to partition and format new IDE hard disk drives.
This is necessary so that you can write or read data from the hard disk.
Make sure to set the partition of the Primary IDE hard disk drives to
active.
5.3.7 HDD SMART Monitoring [Disabled]
Disable or enable hard disk S.M.A.R.T. capability support.
5.3.8 Installed Memory [xxx MB]
Shows the size of installed memory.
5.3.9 Usable Memory [xxx MB]
Shows the size of installed memory.