Asus V3-M2NC61S - Manual (Page 87)

5-26 Chapter 5: BIOS setup
5.5.3 APM Configuration
Select Menu
Item Specific Help
APM Configuration
Restore on AC Power Loss [Power Off]
PWR Button < 4 secs [Instant - Off]
Power On By PCI Devices [Disabled]
Power On By External Modems [Enabled]
Power On by RTC Alarm [Disabled]
x Date (of Month) Alarm 0
x Time (hh:mm:ss) Alarm 0 : 0 : 0
Power On By PS/2 Mouse [Disabled]
Power On by PS/2 Keyboard [Disabled]
Phoenix-Award BIOS CMOS Setup Utility
Power
Restore on AC Power Loss [Power Off]
Select whether or not to restart the system after AC power loss.
Configuration options: [Power off] [Power On] [Last State]
PWR Button < 4 secs [Instant-Off]
When set to [Instant-Off], the system will go soft-off when power button
is pressed for less than 4 seconds. [Suspend] means holding the power
for more than 4 seconds to power off the system. Configuration options:
[Instant-Off] [Suspend]
Power On By PCI Devices [Disabled]
Allows you to enable or disable the PME to wake up from S5 by PCI/PCIE
devices & NV Onboard LAN. Configuration options: [Disabled] [Enabled]
Power On By External Modems [Enabled]
Configuration options: [Disabled] [Enabled]
Power On By RTC Alarm [Disabled]
Set the Date, Time resume by Alarm. Configuration options: [Disabled]
[Enabled]
Power On By PS/2 Mouse [Disabled]
Configuration options: [Disabled] [Enabled]
Power On by PS/2 Keyboard [Disabled]
Configuration options: [Disabled] [Enabled]
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select SubMenu F10: Save and Exit