Asus T2-P - Manual (Page 114)

114 Chapter 5: BIOS setup
5.5.6 Hardware Monitor
CPU Temperature [xxx 0 C/xxx 0 F]
MB Temperature [xxxC/xxxF]
The onboard hardware monitor automatically detects and displays the
motherboard and CPU temperatures. Select [Disabled] if you do not wish
to display the detected temperatures.
CPU Fan Speed [xxxxRPM] or [N/A]
Chassis Fan Speed [xxxxRPM] or [N/A]
The onboard hardware monitor automatically detects and displays the
CPU, chassis, and power fan speeds in rotations per minute (RPM). If any
of the fans is not connected to the motherboard, the specific field shows
N/A.
Hardware Monitor
CPU Temperature [44°C/111°F]
MB Temperature [36°C/96.5°F]
CPU Fan Speed [5234RPM]
Chassis Fan Speed [N/A]
VCORE Voltage [1.808V]
3.3V Voltage [3.376V]
5V Voltage [5.080V]
12V Voltage [11.977V]
SMART Q-Fan Function [Enabled]
Fan Auto Start Voltage [5.0V]
Fan Auto Mode Start Temp [30°C]
Fan Auto Mode Full Speed Temp [70°C]
CPU temperature.
Power On By PCI Devices [Disabled]
When set to [Enabled], this parameter allows you to turn on the system
through a PCI LAN or modem card. This feature requires an ATX power
supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this
item is set to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC
Alarm Minute, and RTC Alarm Second appear with set values.
Configuration options: [Disabled] [Enabled]