Asus ESC700 G2 - Manual (Page 118)

4-44 Chapter 4: BIOS setup
4.7 Boot menu
Bootup NumLock State [On]
[On] Sets the power-on state of the NumLock to [On].
[Off] Sets the power-on state of the NumLock to [Off].
Full Screen Logo [Enabled]
[Enabled] Enables the full screen logo display feature.
[Disabled] Disables the full screen logo display feature.
Set this item to [Enabled] to use the ASUS MyLogo 2™ feature.
Wait For ‘F1’ If Error [Enabled]
[Disabled] Disables this function.
[Enabled] The system waits for the <F1> key to be pressed when error occurs.
Post Report [5 sec]
This item appears only when you set the Full Screen Logo item to [Disabled]. This item
allows you to select the desired Post Report waiting time from 1-10 sec.
Configuration options: [1 sec] [2 sec] [3 sec] [4 sec] [5 sec] [6 sec] [7 sec] [8 sec] [9 sec] [10
sec] [Until Press ESC].
Main Ai Tweaker Advanced Monitor Boot Tool
Exit
Version 2.10.1208. Copyright (C) 2011 American Megatrends, Inc.
Select the keyboard NumLock state
UEFI BIOS Utility - Advanced Mode
Bootup NumLock State On
Full Screen Logo Disabled
Wait For ‘F1’ If Error Enabled
PCI ROM Priority Legacy ROM
Setup Mode EZ Mode
Boot Option Priorities
Boot Option #1 IBA GE Slo...
> Network Device BBS Priorities
Boot Override
> IBA GE Slot 00CB V1372
→← : Select Screen
↑↓ : Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Shortcut
F5: Optimized Defaults
F6: ASUS Ratio Boost
F10: Save ESC: Exit
F12: Print Screen