Asus ESC700 G2 - Manual (Page 40)

Chapter 2: Hardware setup 2-22
2.8 Removing the system fan
You may need to remove previously installed system components when installing or removing
other system components, or when replacing a defective component. This section tells how
to remove the system fan.
To remove the system fan:
1. Disconnect the chassis fan cable from the CHA_FAN1 connector on the motherboard.
2. Locate and remove four system fan
screws at the rear panel. Keep the
screws for later use.
Hold the system fan with one
hand while removing the system
screws.
3. Remove the system fan, and then set
aside.