Hardware setup, 2 layout contents – Asus X900-PI4 User Manual
Page 15
ASUS P4T User’s Manual
15
3. HARDWARE SETUP
3. HARDWARE SETUP
3.2 Layout Contents
Motherboard Settings
1) JEN
p. 17 JumperFree Mode Setting (Disable / Enable)
2) SW1 6-10
p. 18 CPU External Frequency (Switches 6–10)
3) SW1 1-4
p. 20 CPU Core: Bus Frequency Multiple (Switches 1–4)
4) USBPWR
p. 21 USB Device Wake-Up (Enable / Disable)
Memory, CPU and Expansion
1) RIMM A1/A2/B1/B2
p. 22 184-Pin System Memory Support
2) CPU
p. 24 Central Processing Unit
3) Heatsink
p. 25 CPU Heatsink Retention Module Installation
3) PCI 1/2/3/4/5
p. 27 32-bit PCI Bus Expansion Slots
4) AGP Pro
p. 29 Accelerated Graphics Port Slot
Connectors
1) PS2KBMS
p. 30 PS/2 Mouse Port (6 pin female)
2) PS2KBMS
p. 30 PS/2 Keyboard Port (6 pin female)
3) PRINTER
p. 31 Parallel Port (25 pin female)
4) COM1/COM2
p. 31 Serial Ports (9 pin /10-1 pin male)
5) USB
p. 31 Universal Serial Bus Ports 1 & 2 (Two 4 pin female)
6) RJ45
p. 32 Fast Ethernet Port Connector (Optional)
7) PRIMARY/SECONDARY IDE p. 32 Primary and Secondary IDE Connectors (Two 40-1 pin)
8) FLOPPY
p. 33 Floppy Disk Drive Connector (34 pin)
9) CPU/PCI/MAIN_FAN
p. 33 CPU, PCI, and Main Fan Connectors (Three 3 pin)
10) SMB
p. 34 SMBus Connector (5-1 pin)
11) CHASSIS
p. 34 Chassis Intrusion Lead (2 pin)
12) WOL
p. 35 Wake-On-LAN Connector (13 pin)
13) WOR
p. 35 Wake-On-Ring Connector (2 pin)
14) USB2
p. 36 USB Header (10-1 pin)
15) HDDLED
p. 36 Hard Disk Drive Activity LED Connector (2 pin)
16) SCSILED
p. 36 SCSI Activity LED Connector (2 pin)
17) IR
p. 37 Infrared Module Connector (5 pin)
18) TR2
p. 37 Device Thermal Sensor Connector (2 pin)
19) ATXPWR, AUXPWR,
p. 38 ATX Power Supply Connectors (20 pin)
ATX12V
20) PWR.LED (PANEL)
p. 39 System Power LED Lead (3 pin)
21) KEYLOCK (PANEL)
p. 39 System Keyboard Lock Switch Lead (2 pin)
22) SPEAKER (PANEL)
p. 39 System Warning Speaker Lead (4 pin)
23) MSG.LED (PANEL)
p. 39 System Message LED Lead (2 pin)
24) SMI (PANEL)
p. 39 System Management Interrupt Lead (2 pin)
25) PWRSW (PANEL)
p. 39 ATX / Soft-Off Switch Lead (2 pin)
26) RESET (PANEL)
p. 39 Reset Switch Lead (2 pin)
Layout Contents
3. H/W SETUP