Hardware setup, 4 motherboard settings, Asus p4t user’s manual 17 – Asus X900-PI4 User Manual
Page 17: H/w setup motherboard settings
ASUS P4T User’s Manual
17
3. HARDWARE SETUP
3. H/W SETUP
Motherboard Settings
3.4 Motherboard Settings
Motherboard Frequency Settings (DIP Switches)
The motherboard frequency is adjusted through the jumpers and the DIP
switches. The white block represents the switch’s position. The illustration
below shows all the switches in the OFF position.
1) JumperFree™ Mode (JEN)
This jumper allows you to enable or disable the JumperFree™ mode. The
JumperFree™ mode allows processor settings to be made through the BIOS
setup (see 4.4 Advanced Menu).
NOTE: In JumperFree™ mode, all dip switches must be set to OFF.
Setting
JEN
Enable (JumperFree™)
[2-3] (default)
Disable (Jumper Mode)
[1-2]
P4T DIP Switches
P4T
®
1. Frequency Multiple
2. Frequency Multiple
3. Frequency Multiple
4. Frequency Multiple
5. Reserved
6. Frequency Selection
7. Frequency Selection
8. Frequency Selection
9. Frequency Selection
10. Frequency Selection
OFF
ON
123456789
1
0
ON
SW1
P4T JumperFree™ Mode Setting
P4T
®
Jumper
JumperFree
1 2
2 3
JEN
OFF
ON
123456789
1
0
SW1