Chapter 3 – Asus P8P67 PRO (REV 3.1) User Manual

Page 75

Advertising
background image

ASUS P8P67 PRO REV 3.1

3-9

Chapter 3

CPU Power Management

The sub-items in this menu allow you to set the CPU ratio and features.

CPU Ratio [Auto]

Allows you to manually adjust the maximum non-turbo CPU ratio. Use <+> and <-> keys to

adjust the value. The valid value ranges vary according to your CPU model.
Enhanced Intel SpeedStep Technology [Enabled]

Allows you to enable or disable the Enhanced Intel

®

SpeedStep Technology (EIST).

[Disabled] Disables this function.
[Enabled] The operating system dynamically adjusts the processor voltage and

core frequency which may result in decreased average consumption and

decreased average heat production.

Turbo Mode [Enabled]

This item appears only when you set the EIST item to [Enabled].
[Enabled] Allows processor cores to run faster than marked frequency in specific

condition.

[Disabled] Disables this function.

The following five items appear only when you set the EIST and Turbo Mode items to

[Enabled].

Turbo Ratio [Auto]

Allows you to manually adjust the Trubo CPU ratio.
[Auto]

All Turbo ratio are set by Intel CPU default

settings

[By ALL Cores (Can Adjust in OS)]

All numbers of active cores will be set to one

single Turbo ratio in OS

[By Per Core (Cannot Adjust in OS)]

All numbers of active cores can be set to an

individual Turbo ratio in BIOS.

Maximum Turbo Ratio setting in OS [Auto]

This item appears only when you set the Turbo Ratio item to [By ALL Cores (Can

Adjust in OS)]. Use the <+> and <-> keys to adjust the value.
1-/2-/3-/4-Core Ratio Limit

This item appears only when you set the Turbo Ratio item to [By Per Core (Cannot

Adjust in OS)]. Use the <+> and <-> keys to adjust the value.
Long Duration Power Limit [Auto]

Use the <+> and <-> keys to adjust the value.
Long Duration Maintained [Auto]

Use the <+> and <-> keys to adjust the value.
Short Duration Power Limit [Auto]

Use the <+> and <-> keys to adjust the value.
Additional Turbo Voltage [Auto]

Use the <+> and <-> keys to adjust the value.

Advertising