Sata configuration -17, Chapter 3, 4 sata configuration – Asus P8P67 PRO (REV 3.1) User Manual

Page 83: Sata mode [ahci mode, Serial-ata controller 0 [enhanced, Serial-ata controller 1 [enhanced, S.m.a.r.t. status check [enabled

Advertising
background image

ASUS P8P67 PRO REV 3.1

3-17

Chapter 3

3.5.4

SATA Configuration

While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA

Port items show Not Present if no SATA device is installed to the corresponding SATA port.

SATA Mode [AHCI Mode]

Allows you to set the SATA configuration.

[Disabled]

Disables the SATA function.

[IDE Mode]

Set to [IDE Mode] when you want to use the Serial ATA hard disk drives as

Parallel ATA physical storage devices.

[AHCI Mode]

Set to [AHCI Mode] when you want the SATA hard disk drives to use the

AHCI (Advanced Host Controller Interface). The AHCI allows the onboard

storage driver to enable advanced Serial ATA features that increases

storage performance on random workloads by allowing the drive to

internally optimize the order of commands.

[RAID Mode]

Set to [RAID Mode] when you want to create a RAID configuration from the

SATA hard disk drives.

Serial-ATA Controller 0 [Enhanced]

This item appear only when you set the previous item to [IDE Mode]

[Disabled]

Disables the SATA function.

[Enhanced]

Set to [Enhanced] to support two SATA 6.0 Gb/s and two SATA 3.0 Gb/s

devices.

[Compatible]

Set to [Compatible] when using Windows 98/NT/2000/MS-DOS. Up to four

SATA devices are supported under these operating systems.

Serial-ATA Controller 1 [Enhanced]

[Disabled]

Disables the SATA function.

[Enhanced]

Set to [Enhanced] to support 2 SATA 3Gb/s devices.

S.M.A.R.T. Status Check [Enabled]

S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system. When

read/write of your hard disk errors occur, this feature allows the hard disk to report warning

messages during the POST.

Configuration options: [Enabled] [Disabled]

Main

Ai Tweaker

Advanced

Monitor

Boot

Tool

Exit

(1) IDE Mode. (2) AHCI Mode. (3)

RAID Mode.

Back

Advanced\

SATA Configuration >

EFI BIOS Utility - Advanced Mode

SATA Configuration

SATA Mode

AHCI Mode

S.M.A.R.T. Status Check

Enabled

SATA 6G 1 (Gray)

Not Present

SATA 6G 2 (Gray)

Not Present

SATA 3G 3 (Blue)

ASUS CB-521 ATAPI

SATA 3G 4 (Blue)

Not Present

SATA 3G 5 (Blue)

Not Present

SATA 3G 6 (Blue)

Not Present

Advertising