3 main menu, 1 system time, 2 system date – Asus M4A785-M User Manual

Page 49: 3 primary ide master/slave, sata 1~6, Main menu -7 2.3.1, System time -7, System date -7, Primary ide master/slave, sata 1~6 -7, 1 system time [xx:xx:xx, Type [auto

Advertising
background image

ASUS M4A785-M

2-7

2.3

Main menu

When you enter the BIOS Setup program, the Main menu screen appears, giving you an

overview of the basic system information.

Refer to section 2.2.1 BIOS menu screen for information on the menu screen items and

how to navigate through them.

2.3.1

System Time [xx:xx:xx]

Allows you to set the system time.

2.3.2

System Date [Day xx/xx/xxxx]

Allows you to set the system date.

2.3.3

Primary IDE Master/Slave, SATA 1~6

While entering Setup, the BIOS automatically detects the presence of IDE/SATA devices.

There is a separate submenu for each IDE/SATA device. Select a device item then press

<Enter> to display the IDE/SATA device information.

The BIOS automatically detects the values opposite the dimmed items (Device, Vendor, Size,

LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and SMART monitoring). These

values are not user-configurable. These items show Not Detected if no IDE/SATA device is

installed in the system.

Type [Auto]

Selects the type of IDE/SATA drive. Setting this item to [Auto] allows automatic selection of

the appropriate IDE/SATA device type. Select [CDROM] if you are specifically configuring a

CD-ROM drive. Select [ARMD] (ATAPI Removable Media Device) if your device is either a

ZIP, LS-120, or MO drive. Configuration options: [Not Installed] [Auto] [CDROM] [ARMD]

Select Screen

Select Item

+-

Change Field

Tab Select Field

F1 General Help

F10 Save and Exit

ESC Exit

v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.

BIOS SETUP UTILITY

Main

Advanced Power Boot Tools Exit

Use [ENTER], [TAB]

or [SHIFT-TAB] to

select a field.

Use [+] or [-] to

configure system

Time.

System Time

[

19

:34:30]

System Date

[Thu 01/03/2002]

Primary IDE Master

:[Not Detected]

Primary IDE Slave

:[Not Detected]

SATA1

:[Not Detected]

SATA2

:[Not Detected]

SATA3

:[Not Detected]

SATA4

:[Not Detected]

SATA5

:[Not Detected]

SATA6

:[Not Detected]

SATA Configuration

System Information

Main Settings

This item only appears in the Primary IDE Master/Slave, SATA5/6 menus.

Advertising