Asus RS160-S5 - Manual (Page 108)

6-4 Chapter 6: RAID configuration
4. The Adapter Properties screen appears.
Use the arrow keys to select RAID Properties, then press <Enter>.
3. The following screen appears. Select a channel and press <Enter> to enter
the setup.
The numbers of the channel depend on the controller.
Esc = Exit Menu F1/Shift+1 = Help
Alt+N = Global Properties -/+ = Alter Boot Order Ins/Del = Alter Boot List
LSI Corp Config Utility v6.18.01.00 (2007.08.08)
Adapter List Global Properties
Adapter PCI PCI PCI PCI FW Revision Status Boot
BUS Dev Fnc Slot Order
SAS1064E 07 00 00 00 1.22.01.00-IR Enabled 0
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item -/+/Enter = Change Item
LSI Corp Config Utility v6.18.01.00 (2007.08.08)
Adapter Properties -- SAS1064E
Adapter SAS1064E
PCI Slot 00
PCI Address(Bus/Dev/Func) 07:00:00
MPT Firmware Revision 1.22.01.00-IR
SAS Address 50000065:41236545
NVDATA Version 2B.00
Status Enabled
Boot Order 0
Boot Support (Enabled BIOS & OS)
RAID Properties
SAS Topology
Advanced Adapter Properties