Asus RS160-S5 - Manual (Page 119)

ASUS RS160-S5/PX4 6-15
6.2.5 Viewing SAS Topology
1. From the Adapter Properties screen, select SAS Topology.
Press <Alt+D> to display device properties, or <Alt+M> to display more keys.
2. Information about the volume and its member-disks are then displayed.
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item -/+/Enter = Change Item
LSI Corp Config Utility v6.18.01.00 (2007.08.08)
Adapter Properties -- SAS1064E
Adapter SAS1064E
PCI Slot 20
PCI Address(Bus/Dev/Func) 02:00:00
MPT Firmware Revision 1.22.01.00-IR
SAS Address 50000065:41236545
NVDATA Version 2D.02
Status Enabled
Boot Order 0
Boot Support (Enabled BIOS & OS)
RAID Properties
SAS Topology
Advanced Adapter Properties
More keys for the SAS Topology display:
C = Clear Device Mappings for Non-Present Devices
R = Refresh SAS Topology
Enter = On a SAS Enclosure or Expander - Expand or Collapse Item
Enter = On a Disk Drive - Turn on the Locate LED (next key press turns off)
Esc = Exit F1/Shift+1 = Help
Alt+D = Device Properties Alt+M = More Keys
LSI Corp Config Utility v6.18.01.00 (2007.08.08)
SAS Topology -- SAS1064E
Device Identifier Device
SAS1064E(02:00:00) Info
﹂ Controller Direct Attach Devices Controller
﹂ IM VOL LSILOGICLogical Volume 3000