Asus V3-P5G33 - Manual (Page 60)

4-4 Chapter 4: Motherboard info
2. Keyboard power (3-pin KBPWR)
This jumper allows you to enable or disable the keyboard wake-up
feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer
when you press a key on the keyboard (the default is the Space Bar).
This feature requires an ATX power supply that can supply at least 1A
on the +5VSB lead, and a corresponding setting in the BIOS.
P5K-VM
®
P5K-VM Keyboard power setting
KBPWR
1
2 2
3
+5V
(Default)
+5VSB
2 3 1 2
P5K-VM
®
P5K-VM USB device wake-up
1
2 2
3
+5V
(Default)
+5VSB
USBPW1-4
USBPW9-12
+5V
(Default)
+5VSB
1
2 2
3
+5V
(Default)
+5VSB
USBPW5-8
3. USB device wake-up (3-pin USBPW1-4, USBPW5-8,
USBPW9-12)
Set these jumpers to +5V to wake up the computer from S1 sleep
mode (CPU stopped, DRAM refreshed, system running in low power
mode) using the connected USB devices. Set to +5VSB to wake up
from S3 and S4 sleep modes.
The USBPW1-4 jumpers are for the rear USB ports. The USBPW5-8 and
USBPW910 jumpers are for the internal USB connectors that you can
connect to additional USB ports.
• The USB device wake-up feature requires a power supply that can
provide 500mA on the +5VSB lead for each USB port; otherwise,
the system will not power up.
• The total current consumed must NOT exceed the power supply
capability (+5VSB) whether under normal condition or in sleep mode.