5 onboard devices configuration, High definition audio [enabled, Marvell gigabit lan [enabled – Asus V3-P5G33 User Manual

Page 94: Via firewire1394 [enabled, J-micron pata controller [enabled, Serial port1 address [3f8/irq4, Parallel port address [378, Configuration options: [enabled] [disabled, Allows you to enable or disable the jmicron

Advertising
background image

ASUS V-Series P5G33

5-25

5.4.5

OnBoard Devices Configuration

Select Screen

Select Item

+- Change Option

F1 General Help

F10 Save and Exit

ESC Exit

v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.

Onboard Device Configuraiton

High Definition Audio

[Enabled]

Front Panel Type

[HD Audio]

Marvell GigaBit LAN

[Enabled]

LAN Boot ROM

[Disabled]

VIA Firewire 1394

[Enabled]

J-Micron PATA Controller

[Enabled]

Serial Port1 Address

[3F8/IRQ4]

Parallel Port Address

[378]

Parallel Port Mode

[ECP]

ECP Mode DMA Channel

[DMA3]

Parallel Port IRQ

[IRQ7]

Enable or Disable

High Definition Audio

Controller

BIOS SETUP UTILITY

Advanced

High Definition Audio [Enabled]

Allows you to enable or disable the High Definition Audio. The following item

appears only when you enable this item.

Configuration options: [Enabled] [Disabled]

Front Panel Type [HD Audio]

Allows you to set the front panel audio connector (AAFP) mode to legacy

AC’97 or high‑definition audio depending on the audio standard that the front

panel audio module supports. Configuration options: [AC97] [HD Audio]

Marvell GigaBit LAN [Enabled]

Configuration options: [Enabled] [Disabled]

LAN Boot ROM [Disabled]

This item appears only when you enable the previous item.

Configuration options: [Disabled] [Enabled]

VIA Firewire1394 [Enabled]

Allows you to disable or enable the onboard 1394 device support.

Configuration options: [Enabled] [Disabled]

J-Micron PATA Controller [Enabled]

Allows you to enable or disable the JMicron

®

PATA controller.

Configuration options: [Enabled] [Disabled]

Serial Port1 Address [3F8/IRQ4]

Allows you to select the Serial Port1 base address.

Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]

Parallel Port Address [378]

Allows you to select the Parallel Port base addresses.

Configuration options: [Disabled] [378] [278] [3BC]

Advertising
This manual is related to the following products: