Asus P2-M2A690G - Manual (Page 91)

5-33 ASUS P2-M2A690G
Password Check [Setup]
When set to [Setup], BIOS checks for user password when accessing the Setup
utility. When set to [Always], BIOS checks for user password both when accessing
Setup and booting the system. Configuration options: [Setup] [Always]
5.7 Tools menu
The Tools menu items allow you to launch special functions. Select an item then
press <Enter> to display the sub-menu.
Select Screen
Select Item
+- Change Field
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.
BIOS SETUP UTILITY
Main Advanced Power Boot Tools Exit
ASUS EZ Flash 2
Spread Spectrum [Enable]
Press ENTER to run
the utility to select
and update BIOS.
This utility doesn't
support :
1.NTFS format
5.7.1 ASUS EZ Flash 2
Allows you to run ASUS EZ Flash 2. When you press <Enter>, a confirmation
message appears. Use the left/right arrow key to select between [Yes] or [No],
then press <Enter> to confirm your choice. See page 5-6, section 5.1.3 for details.
ASUSTek EZ Flash 2 BIOS ROM Utility V3.05
Current ROM Update ROM
A:
Note
[Enter] Select or Load [B] Backup [ESC] Exit
[Tab] Switch [Up/Down/Home/End] Move
FLASH TYPE: WOINBOND W25P/X80
PATH: A:\
BOARD: M2R68L
VER: 0401
DATE: 06/04/07
BOARD: Unknown
VER: Unknown
DATE: Unknown
Tools Settings