Asus S-presso - Manual (Page 73)

4 - 1 9 4 - 1 9 4 - 1 9 4 - 1 9 4 - 1 9 A S U S S - p r e s s o A S U S S - p r e s s o A S U S S - p r e s s o A S U S S - p r e s s o A S U S S - p r e s s o
4.4.2 4.4.2 4.4.2 4.4.2 4.4.2 Chipset Chipset Chipset Chipset Chipset
The Chipset menu items allow you to change the advanced chipset
settings. Select an item then press <Enter> to display the sub-menu.
Set DDR reference
voltage.
DDR Reference Voltage [Auto] DDR Reference Voltage [Auto] DDR Reference Voltage [Auto] DDR Reference Voltage [Auto] DDR Reference Voltage [Auto]
Allows you to set the DDR reference voltage. We recommend that you
keep the default setting [Auto]. Configuration options: [Auto] [2.60V]
[2.70V]
DRAM Frequency [Auto] DRAM Frequency [Auto] DRAM Frequency [Auto] DRAM Frequency [Auto] DRAM Frequency [Auto]
Allows you to set the DRAM frequency. We recommend that you keep the
default setting [Auto]. Configuration options: [266MHz] [333MHz]
[400MHz] [Auto]
Configure DRAM Timing by SPD [Enabled] Configure DRAM Timing by SPD [Enabled] Configure DRAM Timing by SPD [Enabled] Configure DRAM Timing by SPD [Enabled] Configure DRAM Timing by SPD [Enabled]
When this item is enabled, the DRAM timing parameters are set according
to the DRAM SPD (Serial Presence Detect).
Configuration options: [Disabled] [Enabled]
The following sub-items appear when this item is Disabled.
DRAM CAS# Latency [2.5 Clocks]
This item controls the latency between the SDRAM read command and
the time the data actually becomes available.
Configuration options: [2.0 Clocks] [2.5 Clocks] [3.0 Clocks]
DRAM RAS# Precharge [4 Clocks]
This item controls the idle clocks after issuing a precharge command
to the DDR SDRAM. Configuration options: [4 Clocks] [3 Clocks]
[2 Clocks]
WARNING: Setting wrong values in the sections below
may cause system to malfunction.
DDR Reference Voltage [Auto]
DRAM Frequency [Auto]
Configure DRAM Timing by SPD [Enabled]
Internal Graphic Accelerate Mode [Auto]
Graphic Adapter Priority [AGP/Int-VGA]
Onboard Video Memory [Enabled, 8MB]
Graphics Aperture Size [ 64MB]
Boot Display Device [Auto]
Flat Panel type [640x480LVDS]
TV Standard [Auto]
MPS Revision [1.4]
Advanced Chipset settings