Asus T4-M3N8200 - Manual (Page 74)

5-22 Chapter 5: BIOS setup
Bank Interleaving [Disabled]
Allows you to enable the bank memory interleaving.
Configuration options: [Disabled] [Auto]
Channel Interleaving [Disabled]
Allows you to enable the channel memory interleaving.
Configuration options: [Disabled] [Address bits 6] [Address bits 12] [XOR of
Address bits [20:16, 6]] [ XOR of Address bits [20:16, 9]]
Enable Clock to All DIMMs [Disabled]
Enables or disables unused Clocks to DIMMs when memory slots are not
populated.
Configuration options: [Disabled] [Enabled]
MemClk Tristate C3/ALTVID [Disabled]
Enables or disables MemClk Tri-Stating during C3 and Alt VID.
Configuration options: [Disabled] [Enabled]
Memory Hole Remapping [Enabled]
Enables or disables the memory remapping around memory hole.
Configuration options: [Disabled] [Enabled]
Configuration options: [Auto] [Always
DCT Unganged Mode support [Always]
Enables or disables DCT Unganged Mode.
Configuration options: [Auto] [Always]
Power Down Enable [Enabled]
Enables or disables DDR power down mode.
Configuration options: [Disabled] [Enabled]
The following items appear only when the Power Down Enable item is set to
[Enabled].
Power Down Mode [Channel]
Configuration options: [Channel] [Chip Select]