Asus Adaptec 2025 ZCR - Manual (Page 131)

D-26
Command Line Interface
controller details
Shows details about the open controller and software.
controller firmware compare [/C{controller}]
[{controller}...] [/D{UFI_file_path}]
Compares the contents of each of the flash components on a
controller to the corresponding image in User Flash Image (UFI)
files and indicates whether they match.
Switches
/C{controller} —ID representing the set of controllers on
which to perform the firmware comparison.
/D{UFI_file_path} —Location of the UFI files.
controller firmware save [/C{controller}]
[{controller}...] [/D{UFI_file_path}]
Saves the contents of a controller’s flash in User Flash Image
(UFI) files.
Switches
/C{controller} —ID representing the set of controllers on
which to perform the firmware comparison.
/D{UFI_file_path} —Location of the UFI files.
Note: This command is not supported in Linux.
controller firmware update [/C{controller}]
[{controller}...] [/D{UFI_file_path}]
Updates a controller’s flash components from the flash image
data in a pair of User Flash Image (UFI) files.
Switches
/C{controller} —ID representing the set of controllers on
which to perform the firmware comparison.
/D{UFI_file_path} —Path where the pair of UFI files are
located.