Asus P5G41T-M LX2 - Manual (Page 20)

ASUS P5G41T-M LX2 Series 1-11
DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside
the system may damage the motherboard components. These are not jumpers! Do not
place jumper caps on the fan connectors!
2. CPU and Chassis fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
Only the 4-pin CPU fan supports the ASUS Q-Fan feature.
CPU_FAN
CPU FAN PWM
CPU FAN IN
CPU FAN PWR
GND
Rotation
+12V
GND
CHA_FAN
P5G41T-M LX2/GB/LPT
P5G41T-M LX2/GB/LPT fan connectors
3. Serial ATA connectors (7-pin SATA1-4)
These connectors are for the Serial ATA signal cables for Serial ATA 3Gb/s hard disk
drives and optical disk drives. The Serial ATA 3Gb/s is backward compatible with the
Serial ATA 1.5Gb/s specification. The data transfer rate of the Serial ATA 3Gb/s is faster
than the standard parallel ATA (133 MB/s).
SATA2
GN
D
RSATA_RXN
2
RSATA_RXP2 GN
D
RSATA_TXN2 RSATA_TXP2 GN
D
SATA1
GN
D
RSATA_RXN
1
RSATA_RXP1 GN
D
RSATA_TXN1 RSATA_TXP1 GN
D
SATA4
GN
D
RSATA_RXN
4
RSATA_RXP4 GN
D
RSATA_TXN4 RSATA_TXP4 GN
D
SATA3
GN
D
RSATA_RXN
3
RSATA_RXP3 GN
D
RSATA_TXN3 RSATA_TXP3 GN
D
P5G41T-M LX2/GB/LPT
P5G41T-M LX2/GB/LPT SATA connectors