Asus P5G41T-M LX2 - Manual (Page 32)

ASUS P5G41T-M LX2 Series 2-7
2.4.1 CPU Configuration
The items in this menu show the CPU-related information that the BIOS automatically
detects.
Ratio CMOS Setting [Auto]
Sets the ration between CPU core clock and the FSB frequency. Configuration option: [Auto]
C1E Support [Enabled]
Allows you to enable or disable C1E Support. Configuration options: [Disabled] [Enabled]
Max CPUID Value Limit [Disabled]
Setting this item to [Enabled] allows legacy operating systems to boot even without support
for CPUs with extended CPUID functions. Configuration options: [Disabled] [Enabled]
Intel(R) Virtualization Tech [Enabled]
Enables or disables Intel ® Virtualization Technology. Virtualization enhanced by Intel ®
Virtualization Technology allows a platform to run multiple operating systems and applications
in independent partitions. With virtualization, one computer system can function as multiple
virtual systems. Configuration options: [Enabled] [Disabled]
CPU TM function [Enabled]
Enables or disables Intel ® CPU Thermal Monitor (TM) function, a CPU overheating
protection function. When enabled, the CPU core frequency and voltage are reduced when
the CPU overheats. Configuration options: [Disabled] [Enabled]
Execute-Disable Bit Capability [Enabled]
Allows you to enable or disable the No-Execution Page Protection Technology. Setting this
item to [Disabled] forces the XD feature flag to always return to zero (0).
Configuration options: [Disabled] [Enabled]
• If an invalid ratio is set in CMOS then actual and set values may differ.
• Key in ratio numbers directly.
The following item appears only when you installed an Intel ® Pentium ® 4 or later CPU that
supports the Enhanced Intel SpeedStep ® Technology (EIST).
Intel(R) SpeedStep(TM) Tech [Enabled]
Allows you to use the Enhanced Intel ® SpeedStep ® Technology. When this item is set to
[Enabled], you can adjust the system power settings in the operating system to use the EIST
feature. Set this item to [Disabled] if you do not want to use the EIST. Configuration options:
[Enabled] [Disabled]