Asus ET2221AUTR - Manual (Page 25)

English
25 All-in-One PC ET22 Series
System Setup
OSD Setup:
• Adjusts the horizontal position (H-Position) / vertical position (V-Position) of the OSD
menu.
• Adjusts the OSD timeout from 10 to 120 seconds.
• Enables or disables the DDC/CI (Display Data Channel/Command Interface) function.
Information: Shows the monitor information.
Language: Allows you to set the OSD language.
All Reset: Allows you to reset all OSD settings.
Input signal selection
An Input Select OSD menu appears when you connect the HDMI or VGA cable to the rear
HDMI-input or Display-input port. Use the Menu up or Menu down keys to navigate through
the input options and press the MENU button to activate the option. Refer to Input Select in
the previous section for details.
Configuring the audio output via an HDMI device (on selected models
only)
If you want to use a high-definition TV as an audio output device, connect it to the Home
Theater PC and follow the steps below to configure the audio settings.
To configure the audio output via an HDMI device:
1. From the Start screen, click Desktop to launch the Desktop Mode.
NOTE: For more details, refer to the section Start screen under Working with Windows® 8.
•
•
•
•