Configuring a static ip network connection – Asus ET2221AUTR User Manual
Page 45
Advertising
English
45
All-in-One PC ET22 Series
Configuring a static IP network connection
To configure a static IP network connection:
1. Repeat steps 1 to 4 of the previous section Configuring a
dynamic IP/PPPoE network connection.
2 Click Use the following IP address.
3. Enter the IP address, Subnet mask and Gateway from your
service provider.
4. If needed, enter the preferred DNS Server address and
alternative address.
5. When done, click OK.
Advertising
This manual is related to the following products: