Asus DSL-N10 (VER.B1) - Manual (Page 26)

6 DSL-N10 Chapter 4: Configuring via the web GUI
Ethernet WAN
Ethernet WAN allows you to connect the fiber/xDSL/cable modem cable to your
DSL-N10 specified Ethernet WAN port to work as a pure router. If Ethernet WAN is
enabled, DSL WAN will be disabled.
To set up the Ethernet WAN:
1. Choose the LAN port that you want to use as a WAN port.
. Follow the steps in setting up a home router.
3. Click apply to save the settings.
Note: When you enable the LAN to WAN function, the specified LAN port will lose its connection
to the local area network (LAN).