Rear panel – Asus DSL-N10 (VER.B1) User Manual
Page 8
Advertising
8
DSL-N10
Chapter 1: Knowing your wireless router
Rear panel
Label
Description
Reset
Press this button for more than five seconds to reset the
system to its factory default settings. If this function failed,
refer to section Firmware Restoration on page 9 for
details on how to restore your router to default settings.
Power
Insert the AC adapter into this port to connect your router
to a power source.
On/Off
Press this button to turn the power on/off.
LAN1-LAN4
Connect RJ-5 Ethernet cables to these ports to establish
LAN connection.
WPS
Press this button to launch WPS function.
Wireless On/Off
Press this button to enable or disable wireless function.
ADSL
Connect to a splitter or to a telephone outlet via an RJ-11
cable.
ON/OFF
Advertising