Reading led indicators, Charging the battery – AIPTEK PocketCinema Z20 User Manual
Page 5
English
Connect one end of the supplied AC adapter to the USB
port of the projector and the other end to a wall outlet.
OR
Connect one end of the supplied USB cable to the USB
port of the projector and the other end to a powered PC.
Make sure the projector is powered off.
The charging LED turns orange and the charging starts.
When interrupted the LED went off.
Charging status
Charging time
Powered OFF, charged by AC adapter
around 4 hours
Powered OFF, charged by USB
around 7 hours
Powered ON and connecting with AC adapter no charging
Powered ON and connecting with USB
no charging
Reading LED indicators
The
Power LED is lighting orange when projector is charged.
The
Power LED is lighting green when connected with AC power adapter in standby
mode or the battery is fully charged.
Charging the battery