AIPTEK PocketCinema Z20 - Manual (Page 6)


Slide the Power switch to “ ON” position to turn on the projector.
To turn off the projector, slide the Power switch to “ OFF” position.
Inserting a memory card (optional)
Open the Micro SD card cover.
Gently push the card as indicated (
golden-fingers
facing upwards) until the card reaches the end of the
slot.
When the card is inserted successfully, the icon ( )
will appear on screen. To remove the card, push the card
to release it and then pull it out gently.
Put the cover back.
Turning on/off your projector
Power on the projector.
Press the
MENU button to enter the Setting screen.
Use the Up/Down ( / ) button to select the Language item, and then Press
the OK button to confirm.
Use the Up/Down ( / ) button to select a language.
When done, press the OK button to confirm the setting.
Setting language