AIPTEK SportyCam Z3 Manual - Manual (Page 13)

SportyCam Z3 e-Manual DA
www.aiptek.eu
Page 13
EN
!
Continuous: The Z3 will now take continual pictures automatically. You can set up
different timings (Off, 2, 3, 5, 10, 20, 30 or 60 seconds)
Selftimer: Activates the selftimer (Off, 5 or 10 seconds)
Resolution:
Select one of three different picture resolutions (3, 5 or 8 Megapixel)
Setting 3M 5M 8M*
Resolution in pixel 2048 x 1536 2592 x 1944 3200 x 2400
Asprect ratio 4 : 3 4 : 3 4 : 3
* interpolated
Setup
Beep: Select if you want the keys to beep
Time Display: Select if you want your recordings to have a time and date stamp in the
bottom right corner
Loop Record: Activates continuous recording. The camera will now delete the oldest
files on your microSD card when it is full. Best for using Z3 as a
surveillance camera or monitor
Auto Standby:
Activate Auto Standby. The camera will be in standby after 0, 2, 5 or 10
Minutes. You can reactivate the camera by pressing the shutter or
record button
TV standard: Select the TV standard PAL or NTSC depending on your area
Format: Formatting will delete all files on the active device
(Internal memory or microSD card when inserted)
Please Note: All files (videos, pictures and voice recordings) will be deleted, even
when they are protected! Make sure to backup recorded material that
you need in future.
Default: Restore the settings to factory default