Product overview, Charging your speaker, Pairing the speaker with your bluetooth device – AIPTEK E30 User Manual
Page 2: Notice
www.air2U.eu Page 1
EN
Music Speaker
Product Overview
3
4
5
1
2
9
7
8
6
10
PAIR
1. Volume down (-)
2. Bluetooth/Aux mode Indicator(
)
3. Play /Pause ( )
4. Volume Up (+)
5. Stereo indicator
6. Charging indicator
7. Aux Jack (3.5mm)
8. Charging jack (Micro USB)
9. Power ON/Off
10.Pair
Charging your speaker
Before using your speakers, it is recommended to fully charge the devices to ensure optimal
performance. To charge the speakers, connect the two speakers with the dual USB cable to a USB
port from the power source (e.g. a notebook).
The speaker can be fully charged in around 3.5 hours from empty.
Note: For saving power, please turn off the power if the speakers are not in use.
Pairing the Speaker with Your Bluetooth Device
1. Turn on the Bluetooth function on your smartphone, tablet, or notebook.
2. Turn on two speakers by switching the Power button to “ON”, the blue LED of Bluetooth /AUX
(
) will flash slowly.
3. Wirelessly paring two mono speakers to become stereo speakers:
3-1.
Press and hold the “PAIR” button on both speakers until the blue LED of Bluetooth /AUX
(
) and green LED of STEREO on both speakers are flashing rapidly.
3-2.
Wait for a few seconds until the green LEDs (STEREO) on both speakers become steady
on. The pairing of both speakers is completed.
4. Set up master speaker and pair with mobile device:
4-1.
After both speakers are paired together, press and hold the Play/Pause ( ) button on one of
the speakers until the LED indicator of Bluetooth/AUX (
) flashes blue and red rapidly to
start pairing with your mobile device.
4-2.
Search or scan for available Bluetooth devices on your mobile device. The master speaker
named “air2U E30” will be found on the list. Select the speaker and CONFIRM to pairing.
This speaker becomes the master speaker identified by mobile device.
4-3.
If no action is taken to confirm the paring of the master speaker and your mobile device, the
master speaker will returns to standby mode in steady green after 1 minute. The speaker will
also disappear from the Bluetooth device list. Please resume 4-1 and 4-2 to establish the
paring.
Notice
1. Please refer to the manual of your mobile device about how to activate the Bluetooth function. Key
in password “0000” if it is required during the pairing.