Air Suspension RR-CONV Land Rover/Range Rover Conversion Kit - Manual (Page 2)

Front Air Spring Removal:
1. Raise the front suspension of the vehicle with proper lifting equipment. Both wheels must be off the ground
with no load. ALWAYS USE EXTREME CAUTION WHEN LIFTING VEHICLE! (Refer to shop
manual for lifting instructions)
2. Remove both front wheels.
3. Remove plastic wheel arch liner. 4. Depressurize air spring by removing nylon
air hose. To remove air hose, push down on the
metal collet, while pulling out on the hose.
5. Remove the two upper securing clips. 6. Remove the bolt securing the lower air
spring retaining pin to the front axle.
1