Air Suspension RR-CONV Land Rover/Range Rover Conversion Kit - Manual (Page 4)

Rear Air Spring Removal:
1. Raise the rear suspension of the vehicle with proper lifting equipment. Both wheels must be off the ground
with no load. ALWAYS USE EXTREME CAUTION WHEN LIFTING VEHICLE! (Refer to shop
manual for lifting instructions)
2. Remove both rear wheels.
3. Depressurize air spring by removing nylon 4. Remove top air spring clip.
air hose. To remove air hose, push down on the
metal collet, while pulling out on the hose.
5. Remove lower air spring securing clip. 6. Remove and discard old air spring.
3