AVSL 153.811 SL4-RC - Manual (Page 2)

153.811UK User Manual
ASSEMBLY
1) Roll out the LED Strip from the reel and cut to size only at the clearly marked
scissor points. Ensuring you use a sharp cutting knife or scissors. (Max. 25m)
2) Use the supplied end cap to terminate the open end of the strip by filling the
end cap ½ way with silicone glue and pushing firmly on the end of the strip.
Wipe excess glue away and leave to dry for 10 minutes.
3) If the strip is to be extended onto another strip or fitted around tight
corners, it will be necessary to use a strip coupler (153.817UK) or flexible
link (153.818UK). For either of these options, create the connection in the
same manner as described below for the RGB controller connection.