AVSL 153.811 SL4-RC - Manual (Page 4)

153.811UK User Manual
OPERATION
The SL4-RC LED strip controller comprises of a control box with mains lead input and
4-pin power output.
Control of colours and patterns is facilitated by a wireless handheld RF remote
control. Functions of this remote control are outlined below.
The RGB strip is made up with SMD5050 tri-colour LEDs, which are capable of a wide
range of shades and colours through mixing the red, green and blue components.
7 static colours and white are selectable via 8 colour-coded buttons. The brightness
of these colours is adjustable via brightness + and – buttons.
The SL4-RC controller is pre-programmed with 6 different sequences, accessible via
6 pattern select buttons – AUTO, JUMP3 (3 colour jump), FADE3 (3 colour fade),
FLASH, JUMP7 (7 colour jump), and FADE7 (7 colour fade),
The rate of these patterns is adjustable via SPEED + and – buttons. These patterns
can be paused and played via a single PLAY/PAUSE button.
The LED strip can be switched off (standby) via the red power button.
Disconnect the LED strip controller from the mains when not in use for long periods.
Errors and omissions excepted.
Copyright© 2013. AVSL Group Ltd.