AVSL 153.118 MMD-PC1 PC KIT - Manual (Page 13)

P ramming Manual Programming Manual
3.4.2:Remote Control Operation
User can make method, font or color adjustment of the message. After enter the Edit Mode as
3.2.2,user should firstly press → or ← key so as to enter into method, font or color
can be chosen to display at the message.
Step Keys to press Explanation Display
1. PROG Begin the edit program mode OPEN:??
2. 01 ENT
This is the file number to assign to this new
message file
[CYCLIC]
3.
MET
PREV or NEXT
Assign the method of display to an
Immediate
[IMMED]
4.
COL
PREV or NEXT
Assign the color Green [GRE]
5.
FONT
PREV or NEXT
Assign the font =5*6 Short [5×6]
6. WELCOME Enters in message text WELCOME
7. RUN Exit out of edit message mode SAVE？（Y/N）
8. Y Save the data file as 01
Message begins to
be displayed
3.5: Example 5- Insert beep, speed or pause
Beep: Type of beep sound can be chosen during displaying on a sign.
Speed: Messages can be speeded up or slowed down. It is available for your sign, see
Appendix
A.
Stay timee: Generate a stay time within the programmed message, see Appendix A too.
3.5.1: Software operation
(5). Select Font=7*6 & Color=Rainbow
Note: It turns on Cyclic again
(6). Type in “HONG KONG”
－
Page13
-