AVSL 153.118 MMD-PC1 PC KIT - Manual (Page 22)

P ramming Manual Programming Manual
Note that: You may only set the timer functions while running your message sign.
5.2: Remote control operation
To select the timer function while in edit mode at the end of a message is fine, press the TIME
key. Press the NEXT and PREV keys to cycle through the timer functions and press the ENT
key to make your selection.
Function Description
SET TIME Adjust the Real Time Clock
SET DATE Adjust the Date
ALARM Set alarm times and interval
HOUR ALARM Set the hourly alarm On/Off
12H MODE
If selected, the time will be displayed in 12-hour format
(Note: while programming, always enter the time in 24-hour format)
24H MODE If selected, the time will be displayed in 24-hour format
ADD TIME Add a time display screen in the data file
ADD DATE Add a date display screen in the data file
OFF TIME Tums off at the programmed time of day
ON TIME Tums on at the programmed time of day
Additional Tips On Alarm Setting-
When you select the Alarm option, the sign will indicate C: XXXM:
XXX. Where XXX is a number from 000 to 255.
C is the total times of the alarm to be activated, and M is the time interval between two
activations.
To power on the sign at
08:00 automatically
To power off the sign at
18:30 automatically.
－
Page22
-