English, Specifications trouble shooting guide – Xoro HSD 710 User Manual

Page 120

Advertising
background image

Power supply (V)

Power consumption

9W

Weight (device + battery)

1. kg

Dimensions (W x H x D)

190 mm x 30 mm x 155 mm

DAC

Audio 24 bit /96 Khz, Video 10 bit

Frequency response

+/ 1 dB

Audio s/n ratio

> 90 dB

Audio distortion

> 65 dB

Audio output level

1.4 V

Video output

450 lines

Panel size

7", 16:9

Panel resolution

1440 x 234

Playback time with battery

up to 150 minutes

Operating conditions

10 +60 °C

100 240V AC 50/60Hz

8

120

English

SPECIFICATIONS

TROUBLE SHOOTING GUIDE

Symptom

No power

No picture /
sound

Interference or
scrolling

The player
doesn t start
playback

Correction

3308

Check if AC adapter of power is connected securely.
If powered with the battery, check if it is exhausted.

Make sure the connection is in good condition; volume is not too low;
audio receiver or TV work normally; audio setting is in proper.

Check TV type is correct: PAL/NTSC.

Due to the effect of copy protection. Avoid connecting to a VCR or TV/Vcr
combination.
Adjust the vertical hold on your TV.

Remove the plastic laser pickup protection on the disk tray.
The DVD+/ RW you played should be finalized, and not be an empty disc.
Place the disc with the graphic side up and make sure it s inside the
guide.
Make sure the disc is free from scratches & fingerprints.
Insert a playable disc. (Check the disc type and color system).
Do not playback a disc which region code is different from that of your
player.
Clean the disc.
Cancel the parental lock function or change the parental lock level. (The
Pre set password is

).

Reset the player.

Advertising
This manual is related to the following products: