Xoro HSD 710 - Manual (Page 98)

98
English
QUICK STARTING GUIDE
1. Connecting to an External Power Source
2. Open the protective cover
3. Press the open button on the left to open the disc
cover
4. Inserting a DVD disc
5. Slide the side power switch to 'ON'.
6. Press the PLAY button on the player face
The DVD player will immediately start rendering the DVD
program.
' ' ' '
Connect the power adapter (supplied with the player) to the
side input and to a wall outlet. Do not use any other device
otherwise specified by your dealer.
The cover opens to a maximum 135 only, so please do not try
to open it any further.
Align the center of the DVD disc with the center of the disc
guide. Press gently down on the DVD to snap the disc into
place, then close the disc cover.
In general, the DVD already inserted into the player will start
reading automatically when power is turned on.
When you want to stop, press the STOP button, it will return to
the power on logo. To power off the unit, slide the ON/OFF
switch to the right.
The DVD player will automatically power off in three minutes
after entering screen saver mode. To reset the unit, first slide
power switch to OFF , and then slide it to ON .
0
Open button
Play button
ON/OFF switch
ON/OFF switch