AVSL 600.103 CMT01 User Manual
Page 3
CMT01 User Manual
Replace the battery as soon as the battery indicator appears. With a
low battery, the meter may produce false readings that can lead to
electric shock and personal injury.
Remove the connection between the testing leads and the circuit being
tested, and turn the meter power off before opening the meter case.
The internal circuit of the meter shall not be altered at will to avoid
damage of the meter and any accident.
A soft cloth and mild detergent should be used to clean the surface of
the tester on a regular basis. No abrasive and solvent should be used
to prevent the surface of the tester from corrosion or damage.
The tester is suitable for indoor use only.
Turn the tester power off when it is not in use and take out the battery
when not using for a long time. Check the battery regularly; replace the
battery immediately if any signs of leaking appear. Battery acid will
damage the tester.
General Specifications
Max display:
LCD (1999 count) 46 x 15mm
Polarity:
Automatic, indicated minus, assumed plus
Measure method:
double integral A/D switch implement
Sampling speed:
2 times per second
Over-load indication:
“1” is displayed
Operating Environment:
0ºC-40ºC, at <80%RH
Storage Environment:
-10ºC-50ºC, at <85%RH
Power:
9Vdc (1 x PP3 battery supplied)
Low battery indication:
“ ”
Dimensions:
230 x 68 x 37mm
Weight:
203g