AVSL 600.103 CMT01 User Manual
Page 8
CMT01 User Manual
3) The meter is powered by a single 9V PP3 battery. Snap the
battery connector leads to the terminals of a new battery and
reinsert the battery into the case top. Dress the battery leads so
that they will not be pinched between the case bottom and case
top.
Replace the case bottom and reinstall the screw. Never operate the
meter unless the case bottom is fully closed.
ACCESSORIES
Instruction manual
Set of test leads (red and black)
9V PP3 battery
EN61010–1:2010
This product is classed as Electrical or Electronic equipment
and should not be disposed with other household or commercial
waste at the end of its useful life. The goods must be disposed
of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2014. AVSL Group Ltd.