Babyliss SL33E PESE-PERSONNE ELECTRONIQUE COACHING - Manual (Page 14)

-  -
• The number ‘’ will be displayed on the screen. It shows
you that you are in the session for user . The default
setting of 60cm (or the previously saved value) will
also appear for the height and will flash.
• Press on the up and down (‘’ or ‘’) buttons to select
your height. The numbers will scroll quickly if you
hold the button down. Once your height appears on
the screen, press user to confirm. Your height is now
saved. An audible beep confirms this.
• The scale shows your user number and displays ‘00.0
Kg’. It is ready to use.
Note: The scale turns itself off automatically after
 seconds of non-use.
You have finished entering your personal data.
ERROR MESSAGES
The scale does not display your weight:
• The minimum measurable weight is  Kg.
The ‘err’ message may appear on your screen if:
• your weight exceeds the maximum measurable
weight 80Kg
• the difference in your weight since your last weighing
exceeds 9.9 Kg
• you stepped onto the scale before ’00.0’ appeared.
The ‘lo’ message indicating a weak battery may appear
on the screen if:
• the battery is nearly empty. In this case, replace it
immediately.
REPLACING THE BATTERY
Your scale comes with a CR0 V lithium coin cell battery
To replace the battery:
• When the battery is empty, it should be discarded at
a recycling centre for the safety of the environment. If
the battery is leaking, avoid touching it and discard it
at a recycling centre.
• Insert a new battery of the same type. Place the bat-
tery with the side marked with ‘+’ facing up.