C2G 39979 PCLinq2 Hi-Speed USB Bridge-Network Cable - Manual (Page 4)

PCLinq2 Hi-Speed USB 2.0 Bridge-Network Cable User’s Manual
4. Check afterwards if your built-in network adapter is already shared.
5. Reboot Windows to activate the settings. After Windows has started properly,
plug the other end of the USB Bridge-Network cable to the remote computer.
Make sure you have run the Setup program on the remote computer as well.
Note that you don’t need to do the above additional settings for the remote
computer.
6. Check the remote client computer if the host computer is detected and if the
network and Internet access if functioning.
Windows ME
1. Click Start-Control Panel and double-click on the Internet Options.
2. Go to the Connections folder tab of Internet Properties and click on the
Sharing button.