C2G 29596 WIRELESS USB TO VGA AND AUDIO KIT - Manual (Page 28)

27
1. Why can’t I install .NET?
You may have an older version of .NET, preventing the newer one from being installed. Using
Add/Remove Programs or Programs and Features on the Control Panel, uninstall any version of
Microsoft .NET Framework™ older than version 3.0. Then install Microsoft .NET Framework™ from
the Wireless USB to VGA and Audio Kit installer.
2. My Wireless USB Host Adapter is plugged into my computer and my Wireless VGA Device
Adapter is powered but I do not see anything on my display. What’s wrong?
Check the Wireless USB Manager to see if there is an icon for your Wireless VGA Device Adapter. If
there is no icon, try unplugging and then plugging in your Wireless USB Host Adapter to reload the
Wireless VGA Device Adapter.
If you see an icon that is gray in the Wireless USB Manager, try resetting the Wireless VGA Device
Adapter by unplugging its power and plugging it back in. You should see the icon in the Wireless USB
Manager appear in color when it is connected.
If both Activity Indicators are lit on the Host Adapter and VGA Device Adapter, check your icon tray
and make sure that the DisplayLink Manager is there. If you do not see the DisplayLink Manager
icon, the DisplayLink software is not active. You will need to reboot your computer, and when it
restarts the software will finish its installation.
F
REQUENTLY
A
SKED
Q
UESTIONS