C2G 26630 10_100Base-TX to 100Base-TX Media Converter - Manual (Page 15)

10/100Base-TX to 100Base-FX Mini Converter
- 11 -
Getting Connected
Powering On Unit
The Converter uses an AC power supply 100~240V
AC, 50~60 Hz. The Converter's power supply
automatically self-adjusts to the local power source
and may be powered on without having any or all LAN
segment cables connected.
1. Insert the power cable plug directly into the
receptacle located at the back of the device.
2. Plug the power adapter into an available socket.
Note:
For International use, you may need to change the AC power
adapter cord. You must use a power cord set that has been
approved for the receptacle type and electrical current in your
country.
3. Check the power LED of the Converter
4. When the device is powered on to verify that
power is applied. If not, check that the power
cable is correctly and securely plugged in.