C2G 40472 HDMI 1.3 SPLITTER - Manual (Page 10)

D EVICE I NSTALLATION
Step 4
Plug in the included 5VDC power adapter to the rear panel of the HDMI splitter, and connect the opposite
end into a receptacle outlet.
Step 5
Power on source device as well as your televisions/monitors.
Step 6
Change your televisions/monitors to its HDMI input (please refer to your television/monitor owner’s manual if
assistance is needed with changing inputs).
Step 7
The LED output indicator will illuminate to show proper connection and “handshake”.
9