C2G 40472 HDMI 1.3 SPLITTER - Manual (Page 13)

C ASCADING THE S PLITTER
NOTE: The resolution mode will depend on the first of the sequenced display devices that can successfully communicate
with source device. The detect sequence of 40471 is from Port 1 to Port 2, and 40472 is from Port 1 to Port 4. Make sure
your display devices can support the highest resolution as source device can support, and your display devices are HDCP
compliant and fully support HDCP.
This HDMI 1.3 Splitter will distribute one resolution at a time. If the HDMI 1.3 Splitter is connected to multiple HDTVs
that support different resolutions (720p, 1080i, 1080p), it is recommend to adjust the output resolution of the source device to
match the resolution of the HDTV that has the lowest resolution.
For example, the HDMI 1.3 Splitter (40472) is connected to 4 HDTVs, and one of them supports 720p HD resolution, but
others can support up to 1080p. If you want the displays to show the same HD content, please set the output resolution of
source device to 720p.
12