C2G 40973 3x5 Component Video_Digital Audio Matrix Switch w_RS-232 - Manual (Page 6)

4
Operating the Switch:
Controlling the switch with the infrared remote control
1. Press POWER ON to turn on the matrix switch.
2.
Press 1 – 5 on either the green, red, or orange panels to change the video display of the
device you are using. Green panel represents Input 1. Red panel represents Input 2.
The orange panel represents Input 3.
Example 1 – You would like to route your DVD player on Input
3 to Output 1. Press the number 3 button on the Output 1
row. The LED of Output 1 on the front panel of the switch will
be illuminated orange.
Example 2 – You would like to route your game console on
Input 1 to Output 2, but continue watching the DVD movie
from example 1. Press 1 on Output 2 row. The LED of
Output 2 on the front panel of the switch will be illuminated
green.
Example 3 – You wish to now route your cable box connected
to Input 2 to the displays of both Output 1 and Output 2 at the
same time. Press 2 on Output 1 row, and then press 2 on
Output 2 row. The LED of Output 1 and 2 on the front panel
of the switch will be illuminated red.
Green
Panel Red
Panel Orange
Panel